Asit Instruments logo

Atex

Temperature sensors for risk areas where needs to acquire temperature measurement in complete safety

Atex RTD Pt100 - ASPT-H-Ex Series

The ATEX thermometric complex
Model: ASPT-H-Ex
Pt 100 ohm @ 0 °C, Tmax: °C
Type Element: Single/Duplex
Number of wires for element: 2, 3, 4
Tolerance class: B, A, 1/3 DIN
Sheath Diameter: from 3 to 21 mm
Sheath Material : AISI 304, 310, 316, 321
Isolation: simple or MgO
Sheath Lenght:: on request
Terminal Heads: Ex d ATEX - Tamb [-40 °C a + 60 °C]
Connection: Terminal block or Transmitters Atex output 4/20 mA - Tamb [-25 °C a + 40 °C]
Compression fittings or fixed in Stainless steel

The ATEX thermometric complex will be compliance with the essential health and safety set out in Annex II of Directive 94/9/EC (ATEX) which has been subjected to a conformity assessment procedure for the categories 1G 1/2D with the following string of ATEX marking:

  • II 1G Ex d ia IIC TX X
  • II 1/2 D Ex tD A20/21 IP6X (XXX)°C X

ATEX Certificate Number of Production Quality Assurance is:

  • DNV-MUNO 08 ATEX 3751 Q

Atex Thermocouple - ASTC-H-Ex Series

astc-h-ex

The ATEX thermometric complex
Model: ASTC-H-Ex
Element: Single/Duplex
Type: B,R,S,K,J,E,T,N
Tmax: °C
Junction: insulated, mass, exposed
Tolerance class: Special or Standard IEC584
Sheath Diameter: from 0,5 mm to 21 mm
Sheath Material : AISI 304, 310, 316, 321, Inconel 600
Isolation: simple or MgO
Sheath Lenght:: on request
Terminal Heads: Ex d ATEX - Tamb [-40 °C a + 60 °C]
Connection: Terminal block or Transmitters Atex output 4/20 mA - Tamb [-25 °C a + 40 °C]
Compression fittings or fixed in Stainless steel

The ATEX thermometric complex will be compliance with the essential health and safety set out in Annex II of Directive 94/9/EC (ATEX) which has been subjected to a conformity assessment procedure for the categories 1G 1/2D with the following string of ATEX marking:

  • II 1G Ex d ia IIC TX X
  • II 1/2 D Ex tD A20/21 IP6X (XXX)°C X
ATEX Certificate Number of Production Quality Assurance is:
  • DNV-MUNO 08 ATEX 3751 Q

Atex Thermocouple - ASTC-G-Ex Series

atex-c-2-astc-g

The ATEX thermometric complex
Model: ASTC-G-Ex
Element: Single/Duplex
Type: B,R,S,K,J,E,T,N
Tmax: °C
Junction: insulated
Tolerance class: Special or Standard IEC584
Sheath Ceramic Diameter: from 4 mm to 26 mm (execution ofsheath ceramic a Single or Duplex for protection high temperature)
Sheath Ceramic Material: Ker 610, Ker 799
Isolation: simple or MgO
Sheath Lenght:: on request
Support tube for ceramic: in Aisi , lenght and diameter on request
Terminal Heads: Ex d ATEX - Tamb [-40 °C a + 60 °C]
Connection: Terminal block or Transmitters Atex output 4/20 mA - Tamb [-25 °C a + 40 °C]
Compression fittings or fixed in Stainless steel

The ATEX thermometric complex will be compliance with the essential health and safety set out in Annex II of Directive 94/9/EC (ATEX) which has been subjected to a conformity assessment procedure for the categories 1G 1/2D with the following string of ATEX marking:

  • II 1G Ex d ia IIC TX X
  • II 1/2 D Ex tD A20/21 IP6X (XXX)°C X
ATEX Certificate Number of Production Quality Assurance is:
  • DNV-MUNO 08 ATEX 3751 Q

Thermowells – ASPZ-Ex Series

pozzetto-aspz

Model: ASPZ-Ex
Thermowell of tube or bar
Sheath Material: Aisi 304,310,316,446, Inconel 600
External diameter: on request (minimun wall tickness 3 mm )
Internal hole: on request
External Process thread: GAS/NPT (fixed, compression fittings) or Flanged
Internal thread: GAS or NPT
Lenght: on request
Execution: conical or cylindrical
Pressure max: on request

ATEX Temperature Transmitter - 205X Series

The 205X is a SMART temperature transmitter for assembly on the top of sensor.

It accepts most commonly used Pt100, thermocouple, mV and slide-wire sensors and generates an industry standard (4 to 20) mA transmission signal.

The 205X, has been issued with a EC-type examination certificate, confirming compliance with the European ATEX directive 94/9/EC for:

  • INTRINSIC SAFETY II 1 G EEx ia IIC T4…T6.

ATEX Temperature Transmitter - 210X Series

The 210X is a universal programmable temperature transmitter which accepts most commonly used Pt100, thermocouple, mV and slide-wire sensors and generates an industry standard (4 to 20) mA transmission signal.

The 210X, has been issued with a EC-type examination certificate, confirming compliance with the European ATEX directive 94/9/EC for:

  • INTRINSIC SAFETY II 1 G EEx ia IIC T4…T6.

Atex Transmitter with HART® Protocol – 310X Series

Complete with HART Protocol, the 310 universal temperature transmitter accepts Pt100, thermocouple, mV and slidewire sensors and can be integrated into systems where the HART protocol is required. It has full HART communications protocol which allows the user to quickly and easily download information or interrogate the device.

The SEM310X, has been issued with a EC-type examination certificate, confirming compliance with the European ATEX directive 94/9/EC for:

  • INTRINSIC SAFETY II 1 G EEx ia IIC T4…T6.
  • ENERGY LIMITATION II 3 G EEx nL IIC T6

Back to top

Asit instruments Srl - All Rights are reserved - p.IVA 04812680017 - design by e-power